Anderson Kingfisher (108″)

£29.00£452.00

Dennis Tapsfields design of this sports amphibian, the Kingfisher which is based on Earl Anderson’s prototype which first flew in 1969.

Please select Quantity next to each component product and then select 'Add to basket' at the bottom

ANDERSON KINGFISHER

Plan (3 Sheet) & Article for Dennis Tapsfield designed sports amphibian, the Kingfisher which is based on Earl Anderson’s prototype which first flew in 1969. Definitely one for the water buffs!

£29.00
ANDERSON KINGFISHER

Laser Cut Wood Pack for Dennis Tapsfield designed sports amphibian, the Kingfisher which is based on Earl Anderson’s prototype which first flew in 1969. Definitely one for the water buffs!

£169.00
ANDERSON KINGFISHER

Additional Wood Pack for Dennis Tapsfield designed sports amphibian, the Kingfisher which is based on Earl Anderson’s prototype which first flew in 1969. Definitely one for the water buffs!

£278.00
ANDERSON KINGFISHER

Short Kit (Set) includes Plan, Article, Laser Cut Wood Pack & Additional Wood Pack for Dennis Tapsfield designed sports amphibian, the Kingfisher which is based on Earl Anderson’s prototype which first flew in 1969. Definitely one for the water buffs!

£452.00

Full Description

A 1/4 scale reproduction of a beautiful amphibian. Flies in a ‘Cub-like’ fashion. Definitely one for the water buffs!

The full size: The prototype Anderson Kingfisher was designed and built by Earl Anderson (a Boeing 747 Captain). It took him nine years to complete, and he made the first flight in April 1969. There are probably around fifteen of the aircraft flying at the present time in various parts of the world.

  • Designer: Dennis Tapsfield
  • Wingspan: 108″ / 2745 mm
  • Radio: 4 function
  • Engine: .90 2-stroke or 1.20 4-stroke
  • Wing Area: 1584 sq. in.
  • Fuselage Length: 70″
  • Weight RTF: 260 oz
  • Published in RC Model World Magazine (March 1990)

What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.

What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.

What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.

Specification

  • Designer: Dennis Tapsfield
  • Wingspan: 108″ / 2745 mm
  • Radio: 4 function
  • Engine: .90 2-stroke or 1.20 4-stroke
  • Wing Area: 1584 sq. in.
  • Fuselage Length: 70″
  • Weight RTF: 260 oz
  • Published in RC Model World Magazine (March 1990)

Reviews

There are no reviews yet.

Be the first to review “Anderson Kingfisher (108″)”

You may also like…