BIGTREETECH Octopus V1.1 32-Bit Mainboard with 8 stepper driver ports BTT / UK STOCK
UK Stock. BIGTREETECH Octopus is a very powerful motherboard with 8 stepper driver ports, so this motherboard can control up to 8 different axes. This feature is especially suitable for multicoloured printing and tool changers, for the use of different tools/modules such as different 3D print heads, laser engraving, laser cutting etc. All fantasies and ideas of modifications can be realised.
£59.00
In stock
Specification
- 32-bit
- 180 Mhz ARM-Cortex-M4 CPU
- 8 controllable axes
- Lots of interfaces
Full Description
Octopus Extremely powerful mainboard with 8 stepper driver ports
The mainboard is compatible with Klipper and Marlin open-source software.
180 Mhz ARM-Cortex-M4 CPU:- BIGTREETECH Octopus V1.1 uses a 32-bit chip from the ARM Cortex-M4 series STM32F446ZET6 with a core frequency of 180 MHz, which offers enough power to realise even the most demanding applications and ideas.
Firmware upgrade via SD card:- Update the configuration firmware from the SD card. This method is simple, convenient, and efficient.
Compatible stepper driver interfaces: SPI, UART, STEP / DIR
Matching screens:
- LCD display (LCD12864, LCD2004 etc.)
- TFT touch screens
Fan connections:
- 6 x controllable PWM fans
- 2 x normal fans
- 3 x adjustable voltages for the fans (5V, 12V and 24V)
Other interfaces:
- 8 x stepper driver connections
- Raspberry PI Interface
- CAN BUS, SPI and I2C for extensions
- USB-C
- Dual Z-axis
- 4 x heating cartridge connections
- RGB LED
- WiFi interface for ESP8266 based modules
- BL-Touch and other auto-levelling upgrades
Other features:
- Stallguard for sensorless homing
- Protected thermistor connections
- On-board EEPROM
- High power MOSFET
- Support of automatic shutdown after printing and resume print
You can find more information, instructions and firmware here!
You must be logged in to post a review.
Reviews