Cessna 120 (62″)
Designed by Brian Taylor this 1:6.45 scale, 1575 mm (62”) model has been specifically designed by Brian Taylor for the beginner to building scale model aircraft and so it is an ideal first scale model to build. The 120 is stable and easy to fly, yet is fully aerobatic. The model is of conventional all-wood construction. A laser cut wood pack is available, which contains most of the shaped parts needed, such as fuselage formers and wing ribs, the Additional Wood Pack is also available which contains MOST of the sheet and strip wood and ply to complete the model (hardware not included). A moulded plastic (PETG) windscreen and a fibreglass engine cowling are also available. It is designed to be powered by a .30 size IC engine but experienced modellers should be able to convert it to electric power (details not supplied).
Plans printed to order
Wood Packs laser cut to order
Canopy made to orderSpecification
- Designer: Brian Taylor
- Wingspan: 62″ / 1575 mm
- Scale: 1:6.45
- Length: 36″ / 915 mm
- Weight: 5 lb (2.27 kg)
Full Description
The Cessna 120, along with its stablemate the 140/140A, were very successful, two-seat light aircraft that first flew in 1946 and from there over 7000 were built. It was a rugged, safe, reliable and easy-to-fly aircraft, and it cemented Cessna’s status as one of the leading manufacturers of this type of aircraft.
Plan &/or Short Kit (Set) comes with a huge 22 (A4) page magazine construction article.
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheet.
What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.
Plan MW3346 Laser Cut Wood Pack WP3346 Short Kit SET3346 Canopy CA3346CY Cowl CF3346CL Additional Wood Pack AWP3346
What’s in a Laser or CNC Cut Wood Pack?
What’s in an Additional Wood Pack?
Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated Laser Cut Wood Pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modeling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals & GRP sheets. CLICK HERE for further information & our FAQs
What’s in a Short Kit?
A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.
You must be logged in to post a review.
Reviews