Clean Sweep (47″) – Additional Wood Pack
Additional Wood Pack for the 47″ wingspan version of Clean Sweep, Tim Hooper’s stylish, forward-swept wing, race-inspired Sportster suits an inexpensive power system.
£108.00
Specification
- Wingspan: 47”
- Fuselage length: 38”
- Wing area: 365 sq. in.
- All-up weight: 2 lbs 15oz
- Wing loading: 18.5 oz / sq. ft
- Powertrain: Turnigy SK 35 – 42 1250Kv, 9 x 6 prop, 40A ESC, 3s 2700mAh Li-Po
- Functions (servos): Elevator (1), rudder (1), aileron (2), throttle (via ESC)
Full Description
Clean Sweep, Tim Hooper’s latest design, was the free plan in RCM&E’s Jan 2012 issue. The stylish, forward-swept wing, 47” span racer-inspired Sportster suits an inexpensive power system – Tim used a 3542 1250Kv outrunner and a 3S 2700mAh Li-Po battery for his model. Aimed at the intermediate builder and pilot, it’s an all-balsa design (you can make your own canopy from a drinks bottle) and flies as good as it looks. Don’t forget to check out Tim’s Clean Sweep build blog at www.modelflying.co.uk
What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.
Please note that all plans are printed to order and as such we are unable to accept returns.
Also available for this model
What’s in an Additional Wood Pack?
Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated Laser Cut Wood Pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modeling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals & GRP sheets. CLICK HERE for further information & our FAQs
You must be logged in to post a review.
Reviews