Specification
- Wingspan: 47”
- Fuselage length: 38”
- Wing area: 365 sq. in.
- All-up weight: 2 lbs 15oz
- Wing loading: 18.5 oz / sq. ft
- Powertrain: Turnigy SK 35 – 42 1250Kv, 9 x 6 prop, 40A ESC, 3s 2700mAh Li-Po
- Functions (servos): Elevator (1), rudder (1), aileron (2), throttle (via ESC)
Full Description
Clean Sweep, Tim Hooper’s latest design, was the free plan in RCM&E’s Jan 2012 issue. The stylish, forward-swept wing, 47” span racer-inspired Sportster suits an inexpensive power system – Tim used a 3542 1250Kv outrunner and a 3S 2700mAh Li-Po battery for his model. Aimed at the intermediate builder and pilot, it’s an all-balsa design (you can make your own canopy from a drinks bottle) and flies as good as it looks. Don’t forget to check out Tim’s Clean Sweep build blog at www.modelflying.co.uk
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.
Please note that all plans are printed to order and as such we are unable to accept returns.
SAVE 10% on Selected Laser Cut Wood Packs!
Offers End Soon!
Also available for this model
What’s in a Laser or CNC Cut Wood Pack?
You must be logged in to post a review.
Reviews