Simple construction with a slab-sided model with the emphasis placed on the builder to carve and shape to achieve that beautiful Mosquito line.
Designed using a solid balsa (10mm) sheet wing and box fuselage construction. This is a one-piece model with no detachable parts and is designed for hand launch.
Originally design for two 400-6V direct-drive motors but this model would benefit from a brushless motor and lipo setup.
- Name: DH 98 Mosquito
- Aircraft Type: Electric Semi-Scale Twin
- Designed By: Tony Nijhuis
- Featured in RCM&E July 2004
- Wingspan: 38″ (965mm)
- Length: 28″ (711mm)
- All-Up Weight: 933g (30oz)
- Wing Loading: 14 oz/ sq.ft. Rec’d
- Motors: 2 X 400 6V Rec’d
- Battery: 8 X 1300 CP Rec’d
- No Channels: 3 Control Functions: Aileron, Elevator, Throttle
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.
What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.
What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.
Please note that all plans are printed to order and as such we are unable to accept returns.