DH110 Sea Vixen (50″)

£12.00£262.00

An amazing chance to build this 50″ DH110 Sea Vixen, a seldom modelled, carrier-based Royal Navy fighter from the 1960s.

Please select Quantity next to each component product and then select 'Add to basket' at the bottom

DH110 Sea Vixen

Plan to build this 50″ DH110 Sea Vixen, a seldom modelled, carrier-based Royal Navy fighter from the 1960s.

£24.00
DH110 Sea Vixen - Canopy

PETG Canopy for this 50″ DH110 Sea Vixen, a seldom modelled, carrier-based Royal Navy fighter from the 1960s.

£12.00

Additional Wood Pack for this 50″ DH110 Sea Vixen, a seldom modelled, carrier-based Royal Navy fighter from the 1960s.

£138.00
DH110 Sea Vixen - Laser Cut Wood Pack

Laser Cut Wood Pack for this 50″ DH110 Sea Vixen, a seldom modelled, carrier-based Royal Navy fighter from the 1960s.

£96.00
DH110 Sea Vixen - Set

Short Kit (Set) includes Plan, PETG Canopy, Additional & Laser Cut Wood Packs for this 50″ DH110 Sea Vixen, a seldom modelled, carrier-based Royal Navy fighter from the 1960s.

£262.00

Full Description

Designed by Phil Noel the lightweight design uses balsa, ply and spruce construction. The retracting undercarriage can be fitted (Spring Air 600 units or similar). Wingtip panels are plug-in for ease of transport. Twin 70 mm fan units provide power. 3 channel radio, the minimum required.

  • Designer: Philip Noel
  • Wingspan: 50″ (1270 mm)
  • Power Source: 2 x Airpower/ Wemotec 70mm fan units
  • Length: 55″ (1397 mm)
  • Radio Functions: Throttle, Ailerons, Elevator, Rudder etc.
  • ESC: 2 x 50Amp
  • Battery: 4S1P 4200mAh

What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheet.

What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.

What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.

Plan MW3659 Laser Cut Wood Pack WP3659 Additional Wood Pack AWP3659 Canopy CA3659CY Short Kit SET3659

Specification

  • Designer: Philip Noel
  • Wingspan: 50″ (1270 mm)
  • Power Source: 2 x Airpower/ Wemotec 70mm fan units
  • Length: 55″ (1397 mm)
  • Radio Functions: Throttle, Ailerons, Elevator, Rudder etc.
  • ESC: 2 x 50Amp
  • Battery: 4S1P 4200mAh

Reviews

There are no reviews yet.

Be the first to review “DH110 Sea Vixen (50″)”

You may also like…