Model: Designer: J Wright / 2349.5mm (92.5″) / Engine Size: 0.60 / R/C Functions: 4
Plan is on 3 large detailed sheets.
About the Full size: The Edgley EA-7 Optica is a British light aircraft designed for low-speed observation work, and intended as a low-cost alternative to helicopters. The Optica has a loiter speed of 130 km/h (70 kn; 81 mph) and a stall speed of 108 km/h (58 kn; 67 mph). The Optica project began in 1974 with a company, Edgley Aircraft Limited, formed by John Edgley who, with a small team, designed and built the original prototype. In 1982, institutional investors bought into the project and set up a production line at Old Sarum Airfield in Wiltshire. The aircraft has an unusual configuration with a fully glazed forward cabin, reminiscent of an Alouette helicopter, that provides 270° panoramic vision and almost vertical downward vision for the pilot and two passengers. The aircraft has twin booms with twin rudders and a high-mounted tailplane. The Optica, powered by a 160 hp (119 kW) Lycoming IO-320 engine, made its maiden flight on 14 December 1979 when it was flown by Squadron Leader Angus McVitie, the chief pilot of the Cranfield College of Aeronautics. The Optica, upgraded to the more powerful Lycoming IO-540, entered production in 1983. Edgley Aircraft Limited obtained its initial Civil Aviation Authority certification on 8 February 1985. A total of 22 Opticas have been manufactured, and construction of a 23rd begun but not completed. Ten aircraft were destroyed in an arson attack at the factory.
The Short Kit includes Plan, Canopy, Laser Cut & Additional Wood Packs for the Edgley Optica was designed as an alternative to the helicopter for aerial surveillance.
What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.
What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheet.
Plan RSQ1584 Canopy CANRSQ1584 Laser Cut Wood Pack WPRSQ1584 Additional Wood Pack AWPRSQ1584 Short Kit SETRSQ1584
Please note that all plans are printed to order and as such we are unable to accept returns. The main image is of the full size, not a model.