+44 (0)1684 311682
 

Hawker Hunter (68") Plan
Hawker Hunter SET

Hawker Hunter (68″)

£33.00 – £339.00

A 68” span scale Hawker Hunter model for EDF power and 6 functions R/C.

Please select Quantity next to each component product and then select 'Add to basket' at the bottom

Hawker Hunter (68") Plan

Plan & Article for this Shane Harding design, 68” span Hawker Hunter scale model for EDF power and 6 functions R/C.

 £33.00
Mk3H Ejection Seat (1:6 Scale)

This 1:6 scale 3D printed scale model kit of the Martin-Baker Mk3H Ejection Seat was created after careful study of an operational full-size seat to ensure the model really captures the scale and proportions of these vital safety devices.

 £85.99
Hawker Hunter (68") - Laser Cut Wood Pack

Laser Wood Pack for this superb jet designed by Shane Harding. A 68” span scale model for EDF power and 6 functions R/C.

 £134.00

Additional Wood Pack for this superb jet designed by Shane Harding. A 68” span scale model for EDF power and 6 functions R/C.

 £182.00
Hawker Hunter SET

Short Kit (Set) includes Plan & Article, Laser Cut Wood Pack and Additional Wood Pack. Designed by Shane Harding. A 68” span scale model for EDF power and 6 functions R/C. The perfect combination for building Shane Harding’s Hawker Hunter 1:6 Scale model.

 £339.00
Add to Wishlist
SKU: GP-MW3603 Categories: , Tags: ,

Full Description

A well-detailed plan consisting of 3 sheets. Built of Balsa and Ply the model constructs into a lightweight model that can be broken down for ease of transport. Designed primarily for a 12S powered 110 mm fan unit. This should be a very cost-effective way to obtain an impressive sized Jet model. Designer: Shane Harding

  • Wingspan: 68″ / 1,727.2 mm
  • Power Source: 110MM Ducted Fan
  • Radio Functions: 7
  • Scale: 1:6
  • Length: 93″ / 2,362.2 mm
  • Weight: 16 lb / 7.25 kg

The Hawker Hunter is a subsonic British jet aircraft developed in the 1950s. The single-seat Hunter entered service as a manoeuvrable fighter aircraft and later operated in fighter-bomber and reconnaissance roles in numerous conflicts. Two-seat variants remained in use for training and secondary roles with the Royal Air Force (RAF) and Royal Navy until the early 1990s. The Hunter was also widely exported, serving with 21 other air forces; 50 years after its original introduction it is still in active service, operating with the Lebanese Air Force. (From Wikipedia. Retrieved 5th April 2014, http://en.wikipedia.org/wiki/Hawker_Hunter ) ROLE: FighterFighter-bomber/Ground attack reconnaissance aircraft / NATIONAL ORIGIN: United Kingdom / MANUFACTURER: Hawker Siddeley / FIRST FLIGHT: 20 July 1951 / INTRODUCTION: 1954 / STATUS: Active service with Lebanese Air Force / PRIMARY USERS: Royal Air Force (historical)Indian Air Force (historical)Swedish Air Force (historical)Swiss Air Force (historical) / NUMBER BUILT: 1,972

What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheet.

What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.

What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.

Plan MW3603 Laser Cut Wood Pack WP3603 Additional Wood Pack AWP3603 Scale Ejection seat 3D3603 Short Kit SET3603

Specification

  • Designer: Shane Harding
  • Wingspan: 68″ / 1,727.2 mm
  • Power Source: 110MM DUCTED FAN
  • Radio Functions: 7
  • Scale: 1:6
  • Length: 93″ / 2,362.2 mm
  • Weight: 16 lb / 7.25 kg

Reviews

There are no reviews yet.

Be the first to review “Hawker Hunter (68″)”

You may also like…