Designed by Phillip Kent, this is a model for the scratch builder who has two or three built up models under his belt. This model can be powered by a .30 to .40 cu in four stroke or an electric brushless motor. It uses a typical built up structure with a box fuselage filled out with formers and stringers. The tailplane is sheet balsa, as is the rudder. The wings use a D box leading edge with balsa spars and cap strips. The upper wing bolts to the aluminium cabane struts and the lower to the fuselage. There are ailerons on all four wings.
Please note an aircraft wood pack consists of the ribs and formers for the model. You will need to source additional strip wood and balsa from your local modelling materials supplier to complete the model. Check out our strip and sheet Balsa packs at sarikhobbies.com