Select Page

Mont 3 (98″) – Plan


SKU: RC2055A Category:

Full Description

First Appeared in: RCM&E October 2009 Issue

FLYING Mont-3’s maiden flight was off a 150m winch line into a force 3 wind, a launch that resulted in an elevenminute flight. She behaved herself impeccably, but the flight time wasn’t much to write home about. The next outing, a hand-launch from a sloping field near the windward side of a Devon hedge, resulted in a climb-out of a few hundred feet and a flight that a few club members shared – they didn’t want to bring her down! When I finally managed to wrest the Tx from them so that I could ‘solo’ with her, Mont-3 was more than happy to hang around in the air for ages, in fact after a number of 20+ minute flights it was my neck that gave out. The next modification will be to plaster my neck with Kevlar and epoxy! On the line, Mont-3 goes up as straight as a die and flat turns for thermal flight are a doddle. Despite knowing that the wing is immensely strong, getting her down from a dot in the sky makes me regret not fitting airbrakes; she has to be clawed down out of the sky by doing continuous loops to lose height. Simple to build and a real fun model to fly, I guarantee you’ll enjoy Mont-3 as much as me.
Please note that all plans are printed to order and as such we are unable to accept returns.


Name: Mont-3 Model type: Thermal soarer Modified by: Loris Goring Wingspan: 98.4” (2489mm) Fuselage length: 47.5” (864mm) Wing area: 801 sq. ins. All-up weight: 43oz (1219g) Wing loading: 7.7oz / sq. ft. Functions (servos): Rudder (1); elevator (1) Plan details: Two sheets


There are no reviews yet.

Be the first to review “Mont 3 (98″) – Plan”