O-Four9ier-E (56″) – Additional Wood Pack
Additional Wood Pack for Peter Miller’s updated version of a well-proven glow model to electric power for a 3S LiPo setup Peter Miller’s Fournier E. O-Four9ier-E is very easy to fly being a simple glider but it is also aerobatic and is capable of loops, rolls, and inverted flight with ease. It’s also easy to hand-launch.
£41.00
Specification
- Name: O-Four9ier-E
- Model type: Semi scale
- Designed by: Peter Miller
- Wingspan: 1422 mm (56”)
- Wing area: 0.27 m2 (336 in2)
- Length: 762 mm (30”)
- Weight: 680 g (24 oz)
- Wing loading: 10.3 oz./sq. ft.
- Functions (servos): Ailerons (1), Rudder (1),
- Elevator (1), Throttle (ESC)
- Motor: 2321 2050 kVA
- ESC: 20A
- Prop: APC 5.5 x 4.5E
- Battery: 3S 1100mAh LiPo
- Published in RCM&E January 2023
CONTROL THROWS
- Ailerons: High rate 1/4”, low rate 1/8”
- Elevator: High rate 1/2”, low rate 1/4”
- Rudder: High rate 7/8”, low rate 1/2”
Full Description
The original O-Four9ier was designed in 1991 to be powered by a Cox .049 Texaco. This engine was meant to use larger props and to run at lower rpm than most Cox engines and was designed for the 1/2A Texaco duration contest. This meant that it was extremely economical on fuel. But now Peter Miller wanted a model that would soar in thermals but also be aerobatic, a specification that was matched by the full-size Fournier RF-4. Peter Miller can say that his performed perfectly on both counts. He can remember one thermal flight where other club members who had joined him in the lift had to give up as they could no longer see their models.
So that brings us to the here and now…
This model of O-Four9ier-E is very easy to fly. After all it is a simple glider. However, it is also aerobatic and is capable of loops, rolls and inverted flight with ease. Its is easy to hand launch single handed because it is very stable until asked to do something via the sticks.
What’s in an Additional Wood Pack?
Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated Laser Cut Wood Pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modeling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals & GRP sheets. CLICK HERE for further information & our FAQs
You must be logged in to post a review.
You may also like…
-
0-Four-9ER Plan MAG15
SKU: MAG15 £13.00 Add to basket -
Fournier RF5 (90″)
SKU: GP-MW2535This 90″ span Fournier RF5 is designed to 1:6 scale by Duncan Hutson.£21.00 – £287.00 6 Items AvailableView products -
Fournier RF7 (53″)
SKU: GP-MW3709Peter Miller’s semi-scale Fournier RF-7 is just right for a Cox .049£4.99 – £84.00 5 Items AvailableView products -
Brugger Colibri (46.5″)
SKU: GP-MW2078A super design for the mid-range 4-stroke by Peter Miller, the Colibri has excellent flying characteristics and the streamlined spats...£13.50 – £17.50 3 Items AvailableView products
Reviews