- Designer: Richard Harris
- Model Type: Autogyro
- Rotor Diameter: 46” (1168mm)
- Fuselage length: 42.5” (1079mm)
- All-up weight: 3.5lb /1.4kg (without battery)
- Functions (Servos): Pitch (1x5kg/cm MG); roll (as pitch); rudder (1); throttle (1)
- Rec’d engine: .25 -.36 two-stroke; .40-.50 four-stroke
- Rec’d powertrain: 750 – 1000Kv motor; 60 amo ESC; 3 or 4s 3000mAh Li-Po
- Featured in RCM&E Magazine March 2013
Please Note: Balsa and Spruce are not included for the rotor blades, only for the fuselage and tail.
Useful Links – Read more about the model on the model flying website and blogs – https://www.modelflying.co.uk/panther-autogyro
Full-Size Auto Gyros – Juan de la Cierva took to the skies in his auto rotational flying machine almost 100 years ago. His designs, along with most others of the period, shared one common denominator, they were all of
a tractor configuration. In some form or another most modern pusher autogyros have adopted the ground-breaking work of Ken Wallis, indeed today’s machines are noted for their safety record and are known to many pilots as the motorbike of the skies.
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.
Balsa and Spruce is not included for the rotor blades, only for the fuselage and tail.
What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items. Please note Short Kit (Sets) DO NOT include engines, accessories, paints or glues.