Quickie Ghost (39.25″)

£16.00£99.00

Quickie Ghost is a simple to construct three channel trainer with a twist. This traditionally built model, designed by Tobe Kallner, has an unusual control option – Galloping Ghost.

Please select Quantity next to each component product and then select 'Add to basket' at the bottom

Plan (2 Sheets) for the Quickie Ghost, which is simple to construct a three-channel trainer with a twist. This traditionally built model, designed by Tobe Kallner, has an unusual control option – Galloping Ghost.

£16.00

Laser Cut Wood Pack for the Quickie Ghost, which is simple to construct a three-channel trainer with a twist. This traditionally built model, designed by Tobe Kallner, has an unusual control option – Galloping Ghost.

£62.00

Additional Wood Pack for the Quickie Ghost, which is simple to construct a three-channel trainer with a twist. This traditionally built model, designed by Tobe Kallner, has an unusual control option – Galloping Ghost.

£24.00

Short Kit (Set) includes Plan, Laser Cut Wood Pack & Additional Wood Pack for the Quickie Ghost, which is simple to construct three-channel trainer with a twist. This traditionally built model, designed by Tobe Kallner, has an unusual control option – Galloping Ghost.

£99.00
SKU: GP-RC2225 Categories: , , ,

Full Description

Although you can use traditional servos to steer it around the sky, to add a bit of interest to your piloting pallet Tobe has also designed a modern 3D printed Galloping Ghost actuator compatible with all 35 MHz and 2.4 GHz radios. When coupled with the necessary Arduino based re-coder electronics, designed by Phil Green, it will give you a new control experience that was last popular in the 1960s.

  • Name: Quickie Ghost
  • Type: Sports
  • Designed by: Tobe Källner
  • Span: 39.25” (997mm)
  • Length: 30” (762mm)
  • Weight: 18.5 ozs (524g)
  • Motor: 4-Max 2826 1290
  • ESC: 30A
  • LiPo: 3S 1300 mAh
  • Propeller: 8″ x 4″
  • Controls: Galloping Ghost or Propo (2 x 9g servos)

What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.

What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.

What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.

Plan RC2225 Laser Cut Wood Pack WPRC2225 Additional Wood Pack AWP2225 Short Kit SETRC2225

Specification

  • Name: Quickie Ghost
  • Type: Sports
  • Designed by: Tobe Källner
  • Span: 39.25” (997mm)
  • Length: 30” (762mm)
  • Weight: 18.5 ozs (524g)
  • Motor: 4-Max 2826 1290
  • ESC: 30A
  • LiPo: 3S 1300 mAh
  • Propeller: 8″ x 4″
  • Controls: Galloping Ghost or Propo (2 x 9g servos)

Reviews

There are no reviews yet.

Be the first to review “Quickie Ghost (39.25″)”

You may also like…