Designed by Brian Taylor this 1:6.7 scale Republic P-47D Thunderbolt (Razorback) is superbly detailed, with three large plan sheets that combine to produce a 1930 mm (76”) span all wood constructed model with working flaps and a retracting undercarriage. It was originally intended to be powered by a 1.20 to 1.50 cu. in. 4-stroke engine but experienced modellers should be able to convert it to electric power (details not supplied, so please send us information if you make a successful EP version!) It is not suitable for beginners, either to plan building or model flying.
- Designer: Brian Taylor
- Wingspan: 76″ / 1930 mm
- Power Source: 1.20 to 1.50 cu. in. 4-stroke
- Radio Functions: 6
- Scale: 1:6.7
The P-47D Thunderbolt was one of the most famous planes of WWII. It was an outstanding single-seat fighter plane that excelled in high altitude bomber escort and low altitude ground attacks. The fighter was involved in air-to-air combat and ground attacks in both the European and Pacific theatres. The P-47 was one of the main United States Army Air Forces (USAAF) fighters and served with Allied air forces including France, Britain, and Russia. Mexican and Brazilian squadrons fighting alongside the US were also equipped with the P-47.
What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.
Go Electic: Graham Birt has kindly given us his specification for his conversion of this model to electric. The details are not included in the plan however similar to the specification that Graham also used on Brian’ Taylors Mk.IX Spitfire https://www.sarikhobbies.com/product/supermarine-spitfire-mk-viii-ix-83/ below is the spec for the Razorback!
- Power 160 E flite Outrunner, 245Kv.
- 120Amp Aerostar Opto ESC.
- Emcotec Safety Switch. (Nexus).
- 10S 70-130C Turnigy cells, (2 x 5S in series).
- Electron electric retracts, 30E size. (Nexus).
- Spektrun AR637T telemetry RX
- Spektrum DX9 TX.
- Futaba S3071/3072HV servos.
Maiden flight at Aston Down, CRCS club site, May 2021.
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.
What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.