The home of the worlds best R/C Model Aircraft Designers

UK Manufactured to order: Guaranteed Quality

Login        FAQ

Login        FAQ

30 years Experience

Of Scratch Building & Modelling
The Home of the Model Builder

Made in our Workshop

Laser Cut & Printed to Order
Guaranteed Quality & Detail

Republic P-47D Thunderbolt (Razorback) (76″)

Designed by Brian Taylor, this 1:6.7 scale Republic P-47D Thunderbolt (Razorback) is superbly detailed, with three large plan sheets that combine to produce a 1930 mm (76”) span all wood constructed model with working flaps and a retracting undercarriage. It was originally intended to be powered by a 1.20 to 1.50 cu. in. 4-stroke engine but experienced modelers should be able to convert it to electric power (details not supplied). It is not suitable for beginners, either to plan building or model flying.

Plans printed to order
Wood Packs laser cut to order
Canopy made to order
Republic P-47D Thunderbolt (Razorback) (76") Plan

Plan for this 1:6.7 scale ‘Jug’ is superbly detailed, with 3 large plan sheets that produces a 76” model that any builder would be proud of from all wood construction. Not suitable for beginners.

£26.00Add to basket
Republic P-47D Thunderbolt (Razorback) (76") - FG Cowl

FG Cowl for this large example of the famous American WWII escort-fighter, from the drawing board of champion Brian Taylor.

£48.00Add to basket
Republic P-47D Thunderbolt (Razorback) (76") - Domed Prop Nut (Large)

Aluminium Domed Prop Nut (Large) for this large example of the famous American WWII escort-fighter, from the drawing board of champion Brian Taylor.

£13.00Add to basket
Republic P-47D Thunderbolt (Razorback) (76") - ABS Drop Tanks

ABS Drop Tanks for this large example of the famous American WWII escort-fighter, from the drawing board of champion Brian Taylor. This 1:6.7 scale Republic P-47D Thunderbolt (Razorback) is superbly detailed, with three large plan sheets that combine to produce a 1930 mm (76”) span all wood constructed model with working flaps and a retracting undercarriage.

£9.00Add to basket
Republic P-47D Thunderbolt (Razorback) (76") - Canopy

PETG Canopy for this large example of the famous American WWII escort-fighter, from the drawing board of champion Brian Taylor. This 1:6.7 scale Republic P-47D Thunderbolt (Razorback) is superbly detailed, with three large plan sheets that combine to produce a 1930 mm (76”) span all wood constructed model with working flaps and a retracting undercarriage.

£15.00Add to basket
Reflector Gunsight MkII

If the cockpit of your R/C model Allied WWII fighter looks a bit empty, perhaps this is what’s missing? It’s the reflector gunsight that’s mounted in clear view at the top of the instrument panel. Your fighter is not really complete without one! 1:5 Scale

£18.00Add to basket
Republic P-47D Thunderbolt (Razorback) (76") - Laser Cut Wood Pack

Laser Cut Wood Pack for this large example of the famous American WWII escort-fighter, from the drawing board of champion Brian Taylor. This 1:6.7 scale Republic P-47D Thunderbolt (Razorback) is superbly detailed, with three large plan sheets that combine to produce a 1930 mm (76”) span all wood constructed model with working flaps and a retracting undercarriage.

£272.00Add to basket

Additional Wood Pack for this large example of the famous American WWII escort-fighter, from the drawing board of champion Brian Taylor. This 1:6.7 scale Republic P-47D Thunderbolt (Razorback) is superbly detailed, with three large plan sheets that combine to produce a 1930 mm (76”) span all wood constructed model with working flaps and a retracting undercarriage.

£217.00Add to basket
Buy the Short Kit & Save 10%Republic P-47D Thunderbolt (Razorback) (76") - Full Set

Short Kit (Set) includes Plan, Laser Cut & Additional Wood packs, Cowl, Canopy, Domed Prop Nut, ABS drop tank and 1:5 Scale 3D printed Reflector Gunsight MkII (3D055) for Brian Taylor’s larger example of the famous American WWII escort-fighter on superbly detailed plan sheets that produces a superb model that achieved 3rd place in 1994 British Scale Nationals. Construction from 3 large plan sheets and all wood and featuring working flaps and retracting undercarriage.

£618£525.00Add to basket

Specification

  • Designer: Brian Taylor
  • Wingspan: 76″ / 1930 mm
  • Power Source: 1.20 to 1.50 cu. in. 4-stroke
  • Radio Functions: 6
  • Scale: 1:6.7

Full Description

The P-47D Thunderbolt was one of the most famous planes of WWII. It was an outstanding single-seat fighter plane that excelled in high altitude bomber escort and low altitude ground attacks. The fighter was involved in air-to-air combat and ground attacks in both the European and Pacific theatres. The P-47 was one of the main United States Army Air Forces (USAAF) fighters and served with Allied air forces including France, Britain, and Russia. Mexican and Brazilian squadrons fighting alongside the US were also equipped with the P-47.

Designed by Brian Taylor this 1:6.7 scale Republic P-47D Thunderbolt (Razorback) is superbly detailed, with three large plan sheets that combine to produce a 1930 mm (76”) span all wood constructed model with working flaps and a retracting undercarriage. It was originally intended to be powered by a 1.20 to 1.50 cu. in. 4-stroke engine but experienced modelers should be able to convert it to electric power (details not supplied, so please send us information if you make a successful EP version!) It is not suitable for beginners, either to plan building or model flying.

Go Electic: Graham Birt has kindly given us his specification for his conversion of this model to electric. The details are not included in the plan however similar to the specification that Graham also used on Brian’ Taylors Mk.IX Spitfire https://www.sarikhobbies.com/product/supermarine-spitfire-mk-viii-ix-83/ below is the spec for the Razorback!

  • Power 160 E flite Outrunner, 245Kv.
  • 120Amp Aerostar Opto ESC.
  • Emcotec Safety Switch. (Nexus).
  • 10S 70-130C Turnigy cells, (2 x 5S in series).
  • Electron electric retracts, 30E size. (Nexus).
  • Spektrun AR637T telemetry RX
  • Spektrum DX9 TX.
  • Futaba S3071/3072HV servos.
Maiden flight at Aston Down, CRCS club site, May 2021.
           

What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.

What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.
What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.

Plan MW3335 Laser Cut wood pack WP3335 Cowl CF3335CL Additional Wood Pack AWP3335 Domed Nut CD3335SP Drop tanks CA3335TK Canopy CA3335CY Short Kit (Set) SET3335

What’s in a Laser or CNC Cut Wood Pack?

A CNC or Laser Cut Wood Pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply & lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals & GRP sheets.

What’s in an Additional Wood Pack?

Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated Laser Cut Wood Pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modeling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals & GRP sheets. CLICK HERE for further information & our FAQs

What’s in a Short Kit?

A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.

CLICK HERE for further information & our FAQs

Shopping Basket0
Nothing in the basket!
Continue shopping
0