The home of the worlds best R/C Model Aircraft Designers

UK Manufactured to order: Guaranteed Quality

Login        FAQ

30 years Experience

Of Scratch Building & Modelling
The Home of the Model Builder

Made in our Workshop

Laser Cut & Printed to Order
Guaranteed Quality & Detail

Riva Aquarama 1:24th Scale version – Short Kit (Set)

Short Kit (Set) includes Plan, Article and Laser Cut Wood Pack for the 1:24th Scale Version of our Riva Aquarama, a scale Riva powerboat for static display.


Short Kit (Set) Saving: 15%Usual Price: £41 (when purchasing component parts individually)
Made to order


  • 1:24 Scale: Plan MAR2552/SM
  • Designer: K.J. Laugere
  • Length: 370mm
  • Beam: 104mm

Full Description

This is a wood pack only and is based on the larger scale (1:12 scale) plan of the Riva Aquarama MAR2552/LG

One-sheet plan & Article, giving all frames templates and some construction data. Power by twin 400 motors driving twin shafts (1:12 Scale: version). Scale appearance with sparkling performance! Designed by J.J. Laugere. Featured in Marine Modelling Magazine April 1997.

Plan Information (based on 1:12 version): The original model from which these plans were developed was built as a static model for display only. The materials chosen were those suited to the reproduction of the fine mahogany finish for which Riva boats are famous, with no regard to being lightweight for good speed on the water. You may choose to work in ply or mahogany, particularly if the static display is the priority, or prefer to use balsa and light ply to keep weight down and maximise performance. Working or static? Before building your own model, consider whether you wish to have a static model or one which performs in a suitable scale speed fashion. Twin Speed 400 motors with two commercial type stainless steel shafts and tubes will offer a good solution for sensible performance.  Hull construction: The basic structure is of classic chine boat type: The keel, side stringers and frames interlock to form an ‘egg box’ structure. The hull is built upside down on a flat building board. Hull skins: The hull bottom is best made from 1.5mm plywood, although balsa could be used. This would be quite soft and would need a coat of glass cloth to protect it.  The planks must be profiled so that they will fit at the bow. Balsa can be used, but a final thin veneer of mahogany will be needed.  Power and radio control: It is possible to install twin 400 size motors under the seats with direct drive to the props, but the plan only includes basic information.  Deck: The wooden planked section of the deck is made with 5mm x 3mm mahogany strip wood separated by poplar or other contrasting strips.  Not for beginners… The plan gives a starting point for modellers wishing to build a Riva Aquarama Special, but you do need to refer to photos of individual boats to fill in the details. For modellers with a little previous experience, it should make a fine model of a world-class powerboat.

What’s in a Short Kit?

A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.

CLICK HERE for further information & our FAQs


    Be the first to review “Riva Aquarama 1:24th Scale version – Short Kit (Set)”
    Sarik Hobbies - for the Model Builder
    Shopping Basket0
    Nothing in the basket!
    Continue shopping