+44 (0)1684 311682
 

Small Rotary Tools / Perma-Grit

£11.95 – £75.99

Small Rotary Tools – Narrow & Wide Cone, Drum, Pancake, Domehead, Rod and Ball Rotaries + Boxed Kits

Please select Quantity next to each component product and then select 'Add to basket' at the bottom

The COURSE ROTARY KIT enables the user to cut thin and fragile materials, as well as giving the best finish, or debur rough cut or sawn edges.

 £54.99

The COURSE ROTARY KIT enables the user to cut thin and fragile materials, as well as giving the best finish, or debur rough cut or sawn edges.

 £54.99

The COURSE ROTARY KIT enables the user to cut thin and fragile materials, as well as giving the best finish, or debur rough cut or sawn edges.

 £75.99

The FINE ROTARY KIT enables the user to cut thin and fragile materials, as well as giving the best finish, or debur rough cut or sawn edges.

 £75.99
Small narrow rotary cone file

Small Rotary Narrow Cone Fine finishing Grit, drills own pilot hole. Make and enlarge holes. Fine grain grit: 320 (USA 120) for fine finishing

 £11.95
Small wide rotary cone file

Rotary Wide Cone Coarse Grit, drills own pilot hole. Make and enlarge holes. Coarse grain grit: 180 (USA 60) for quick cutting and shaping

 £11.95
Small wide rotary cone file

Rotary Wide Cone Fine finishing Grit, use to smooth joints and edges. Fine grain grit: 320 (USA 120) for fine finishing

 £11.95
Small narrow rotary cone file

Rotary Narrow Cone Coarse Grit, drills own pilot hole. Make and enlarge holes.

Coarse grain grit: 180 (USA 60) for quick cutting and shaping

 £11.95
Small rotary drum file

Fine grain grit: 320 (USA 120) for fine finishing

 £11.95
Small rotary drum file

Coarse grain grit: 180 (USA 60) for quick cutting and shaping

 £11.95
Small rotary pancake file

Rotary Pancake Fine finishing Grit, cuts on the end face, make and smooth out hollows. Fine grain grit: 320 (USA 120) for fine finishing

 £11.95
Small rotary pancake file

Rotary Pancake Coarse Grit 20 mm,  cuts on the end face, make and smooth out hollows. Coarse grain grit: 180 (USA 60) for quick cutting and shaping

 £11.95
Small rotary domehead file

Rotary Domehead Fine finishing Grit, parallel sides, enlarge and clean holes. Fine grain grit: 320 (USA 120) for fine finishing

 £11.95
Small rotary domehead file

Rotary Domehead Coarse Grit, parallel sides, enlarge and clean holes. Coarse grain grit: 180 (USA 60) for quick cutting and shaping

 £11.95
Small rotary rod file

Fine grain grit: 320 (USA 120) for fine finishing

 £11.95
Small rotary rod file

Coarse grain grit: 180 (USA 60) for quick cutting and shaping

 £11.95

Rotary Ball Coarse Grit,  shaping, keying and lightening. Coarse grain grit: 180 (USA 60) for quick cutting and shaping

 £11.95

Rotary Ball Coarse Grit,  shaping, keying and lightening. Fine grain grit

 £11.95
Sharp Taper Rotary

Large Rotary Sharp Taper.  Tapers to a point. FINE Grit.  Designed to fit Dremel and other hobby tools, you can use this tungsten carbide tool from Perma-Grit to cut wide range of materials in any direction without chipping, which leaves little need for finishing.

 £15.25

Large Rotary Taper, Coarse Grit.

 £15.25
Add to Wishlist
SKU: GP-PGRF Categories: , , , , , , , , Tag:

Full Description

Perma-Grit Rotaries have an integral arbor, enabling them to be used in reversible drive tools. The arbor diameter is 3.1 mm (1/8”) and designed to fit Dremel, Proxon and Flexi-drive drills. They allow the user to cut a wide range of materials, quickly and cleanly, leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials, without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics, etc. Excellent on Perspex, Plexiglass and Lexon. Below 10,000 RPM they will not melt, crack or chip these materials . (Not recommended for use on metal). Note: Rotaries should be fully inserted into the chuck and fully tightened before using. Maximum RPM 20,000 Low – Medium. SAFETY: Always wear protective goggles when using Rotary Tools. CAUTION : Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.

Narrow Cone PGRF1C & PGR1F / Wide Cone PGRF2C &  PGRF2F / Drum Rotary PGRF3C & PGRF3F / Pancake Rotary PGRF4C & PGR4F / Domehead Rotary PGRF5C & PGRF5F / Rod Rotary PGRF6F & PGRF6C / Ball PGRF8C & PGRF8F / Boxed Rotary Set 5 PGKT5C & PGKT5F / Boxed Rotary Set 7 PGKT1C & PGKT1F / Taper Fine PGLR7F Course PGLR2C

Reviews

There are no reviews yet.

Be the first to review “Small Rotary Tools / Perma-Grit”