The home of the worlds best R/C Model Aircraft Designers

UK Manufactured to order: Guaranteed Quality

Login        FAQ

30 years Experience

Of Scratch Building & Modelling
The Home of the Model Builder

Made in our Workshop

Laser Cut & Printed to Order
Guaranteed Quality & Detail

Stampe SR-7 (53″) – Additional Wood Pack

Additional Wood Pack for this 53″ wingspan semi-scale design by Peter Miller, a Belgian monoplane trainer based on the Stampe SV-4b biplane manufactured by the Stampe & Renard factories.

£69.00

Made to order

Specification

  • Name: Stampe SR-7
  • Type: Stand-off scale
  • Designed by: Peter Miller
  • Length: 40”
  • Span: 53”
  • Wing area: 430 sq. in.
  • Weight: 58 oz.
  • Wing loading: 19.42 oz. per sq. ft.
  • Power: 3541 1070 brushless motor, 40-amp ESC, 3S 3000mAh battery, 11″ x 5.5″ prop
  • Controls: Ailerons, elevator, rudder, throttle
  • Control throws: Ailerons – High rates 1/2”, low rates 3/8″ / Elevator – High rates 1/2”, low rates 3/8” / Rudder – High rates 1”, low rates 1/2”

Full Description

Peter Miller’s plan design for a Belgian monoplane trainer that evolved from the Stampe SV-4b biplane manufactured by the Stampe & Renard factories.

“…this model is decidedly stand-off scale. However, it looks right and that is the main thing”

From Peter Miller:- have a long list of models that I may build ‘one day’ and on that list was the Stampe SR-7, a Belgian built trainer that looks a bit like a DeHavilland Chipmunk, but which is a lot easier to build. For some reason, I finally decided to get around to designing the model. Only three aircraft were ever built and one of those has vanished without a trace. This is quite useful because those modellers who insist on using a non-scale colour scheme can claim that that is the one that they have built! I have chosen the one in the Brussels Air Museum as it is the only one for which I can find reliable colour pictures. The three views that I have are rather inaccurate and another set was extremely sparse on detail. Therefore, this model is decidedly stand-off scale. However, it looks right and that is the main thing. The all-up weight of my model ready to fly is 3 lbs 10 ounces. I am flying it on an 11 x 5.5 APC propeller. 

    • Name: Stampe SR-7
    • Type: Stand-off scale
    • Designed by: Peter Miller
    • Length: 40”
    • Span: 53”
    • Wing area: 430 sq. in.
    • Weight: 58 oz.
    • Wing loading: 19.42 oz. per sq. ft.
    • Power: 3541 1070 brushless motor, 40-amp ESC, 3S 3000mAh battery, 11″ x 5.5″ prop
    • Controls: Ailerons, elevator, rudder, throttle
    • Control throws: Ailerons – High rates 1/2”, low rates 3/8″ / Elevator – High rates 1/2”, low rates 3/8” / Rudder – High rates 1”, low rates 1/2”

What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.

What’s in an Additional Wood Pack?

Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated Laser Cut Wood Pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modeling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals & GRP sheets. CLICK HERE for further information & our FAQs

Reviews

    Be the first to review “Stampe SR-7 (53″) – Additional Wood Pack”
    Sarik Hobbies - for the Model Builder
    Shopping Basket0
    Nothing in the basket!
    Continue shopping
    0