Tracer-E (37″) – Laser Cut Wood Pack
Laser Cut Wood Pack for Tracer-E, which is a wooden version of the iconic Club 20 pylon racer of the ’70s and ’80s for electric power.
SAVE 5% on Selected Laser Cut Wood Packs!
£67.00 £63.65
Specification
- Designer: Sid King
- Wingspan: 37″ / 939.8 mm
- Power Source: Ver 1 – Robotbirds A-3530/8 1700 Kv Ver 2 – AK Models AK-2835/ 1750 Kv
- Weight: 34 oz. / 963.88 g
- Length: 30” / 762 mm
- Battery: 3S 2200 mAh 25C
- Radio Functions: 3
- Wing Area: 300 sq. in. / 1394 dm2
- Wing Loading: 17 oz./sq.ft.
- Prop: Version 1 – 6” x 5.5” APC-E Version 2 – 6” x 5”
- EMPESC: Robotbirds Basic 40 amp with BEC
- Battery: 3S 2200 mAh 25C
- Control Throws: Elevator – Low rate +/- 5 mm, High rate +/- 6.5 mm Ailerons – Low rate +/- 6 mm, High rate +/- 8 mm
Full Description
Designed by Sid King to accept both 28mm and 35mm diameter motors with a power range of 250 to 350 watts, and Kv values in the region of 1500 to 1700, serviced by a 3S LiPo of around 2200 or 2500 mAh, via a 40 amp ESC. It will take a 4S but as a sports model, 3S is adequate. Span is 37”, utilising 36 in materials, giving an all-up weight of around 35 ozs.
Intended to be hand-launched, but options are included for undercarriages. The designer does not recommend I.C. power for this model.
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheet.
SAVE 5% on Selected Laser Cut Wood Packs!
Also available for this model
What’s in a Laser or CNC Cut Wood Pack?
You must be logged in to post a review.
Reviews