Werewolf is a very nice sports aerobatic model that can be finished to look like a Luftwaffe war machine or whatever you like. Enjoy her, she has a terrific performance. The completed aeroplane should weigh in at around 4 – 41/2 lb, depending on the motor used, and if you ask me the C of G is better right at the front of the range.
- Model Type: Character Warbird
- Designed By: Peter Miller
- Wingspan: 52″
- Fuselage Length: 40 1/2 “
- Wing Area: 520 sq. in.
- All-Up Weight: 4lbs 5ozs
- Wing Loading: 19 oz/sq.ft.
- Functions (servos): Aileron (2), elevator (1) rudder(1), throttle(1)
- Rec’d Motor: .32-.40 two-stroke
- CONTROL SURFACE TRAVEL:-
- Ailerons: 19mm (3/4”) – high rate
- 13mm (1/2”) – low rate
- Elevator: 10mm (3/8”) – high rate
- 7mm (1/4”) – low rate
- Rudder: As much as possible
Werewolf came about after an email correspondent suggested Peter Miller designed a 1.5 size version of Peter Russell’s 334G – a very nice little control line stunt model from the mid ‘50s, styled on the Focke Wulf 190. Although scaling other designs is not what Peter Miller does, he liked the FW 190 and used the concept to design my own version. Of course, a true-scale ‘190 would be lacking in wing area and the nose too short for the type of model that Peter Miller enjoys to fly, so Werewolf is the result.
There’s nothing complicated in the construction method, indeed it employs Peter Miller’s standard build techniques proven over many designs. Oh, and you’ll not have to go hunting for a canopy or Laser Cut parts as they’re available from us at Sarik Hobbies.
Article Link: https://www.modelflying.co.uk/werewolf
What’s in a Laser or CNC Cut Wood Pack? – A CNC or laser cut wood pack contains most, if not all, of the intricately shaped parts shown on the plan, which would be difficult or time-consuming to cut out by hand. It does not contain any sheet or strip wood, which you will need to buy separately. Alternatively, you can purchase an Additional Wood Pack, if available. Our Laser or CNC Cut Wood Packs only contain balsa, ply and lite ply and do not include other materials that may be required to complete the model, such as hardwoods, metals and GRP sheets.
What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.
What’s in a Short Kit? – A short kit usually contains, where available, the plan, the laser/CNC cut wood pack, additional wood pack, canopy, cowl or any other available Glass Fibre or plastic moulded items.
Please note this item is made to order and as such we can not accept returns unless the item is faulty.
Plan RC2045 Additional Wood Pack AWPRC2045 Laser Cut Wood Pack WPRC2045 Canopy CANRC2045 Short Kit (Set) SETRC2045